| Customization: | Available |
|---|---|
| CAS No.: | N/a |
| Formula: | N/a |
|
Still deciding? Get samples of US$ 1000/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This product is used as a medium and low voltage cross-linked polyethylene insulated cable cross-linking semi-conductive conductor shielding. With stable quality, it produces cables with excellent performance in electrical and physical etc.
| Type | Usage |
| PYJJ-35 | 35kV crosslinked polyethylene insulated cable insulation with peroxide crosslinked semi-conductive shield |
Standard:
JB/T 10738-2007
| No. | Item | Unit | Typical Value |
| 1 | Density | g/cm3 | 1.11 |
| 2 | Tensile Strength(T.S)≥ | Mpa | 15 |
| 3 | Elongation at Break(E)≥ | % | 220 |
| 4 | The condition of Thermal aging test conditions | / | 135ºCx168h |
| Variation ratio of tensile strength | % | 20 | |
| Variation ratio of elongation at break | % | -20 | |
| 5 | Impact brittle property (-40ºC) | / | 12/30 |
| 6 | Volume Resistivity (20ºC) | Ω.cm | 40 |
| 7 | Volume Resistivity (90ºC) | Ω.cm | 800 |
Production Processs
Recommendable temperature of the extruder fuselage: 70ºC-110ºC.
Neck temperature: 100ºC-110ºC
Head temperature: 110ºC-115ºC
Recommendable to use the mesh 20x60 with double-layer filter.
Package Storage
The semi conductive shielding material is installed in the double-layer polyethylene film. After sealed package, it is loaded into the hard corrugated box which is not easy damaged, and the outer membrane is water proof, the net weight of each case is 600kg. It is stored in a clean, dry and ventilated warehouse, with a height of less than two layer. The transport process keeps away from sun, rain and mechanical impact.
){kind=link}